I updated the motor firmware, but now it no longer responds when I try to operate the blind.

The motor will need to be placed into deep sleep and woken back up again. To do this:

Place motor into deep sleep

1. Press and hold the settings push button on the blind for 3 seconds until the LED blinks green.
2. While LED is blinking green, press and hold settings push button until LED blinks red plus motor buzzer noise.
3. While LED is blinking red, press and hold settings push button for 6 seconds until LED flashes green 4x fast plus motor buzzer noise.
4. Motor placed into deep sleep.
    

Awake motor from deep sleep

1. Press and hold the settings push button on the blind for 6 seconds until LED flashes red 4x fast plus long motor buzzer noise.
2. Motor awake and able to be operated.